Emergency light LED REX MINI 60LM AUTOTEST IP65

Emergency light AUTOTEST REX MINI 60 lumens.

Non-permanent emergency lighting, operating only in case of mains failure. With pre-plate for easy installation and maintenance. Made of polycarbonate under standards: UNE-EN 60598-2-22, UNE-EN 60598-1, UNE-EN 62031 and UNE-EN 62384.

It contains 21 SMD5730 LED chips with a total of 60 lumens, high quality, provides a clear and homogeneous illumination. Waterproof Ni/CD battery, automatically activated with an autonomy of 1 hour. High protection rating IP65. Matt opal diffuser.

The AUTOTEST emergency lights are highly recommended by the REBT (Low Voltage Electrotechnical Regulation), as it recommends periodic revisions of the safety lighting system at least every 3 years and with the AUTOTEST emergency lights, it informs in real time of the status of the luminaire, automatically performing all the tests indicated in the UNE-EN-50172 standard.

LED indicator of mains presence and battery charge. By means of a LED diode it indicates if the voltage is connected and the accumulated battery charge. Luminous intensity of 60 lumens. Manufactured in polycarbonate injection, with glazed diffuser that avoids to see the interior.

Advantages of Mini Rex emergency luminaires

It illuminates the exits or some necessary service for the moment in which a power failure occurs and in addition, the AUTOTEST system, provides greater security for the premises, informing in real time the status of the emergency luminaire. You can place as many as you need, taking into account the installation and location regulations, depending on the place.

• ✔ Self-test.
• LED indicator of mains presence and battery charge.
• Polycarbonate and opal diffuser.
• ✔ Emergency exits.
• ✔ Remote controllable.
• ✔ Non-permanent, operates only in the absence of mains.
• ✔ Installation with pre-plate.
• ✔ Surface (ceiling or wall) and recessed installation (with accessory not included).
• ✔ IP65.

Recessed or surface-mounted emergency lights.

Agolar's AUTOTEST Rex Mini emergency light can be wall or ceiling mounted and can be installed in two ways:

• Recessed: With the accessory not included for recessing. Replace the old luminaire with this one by placing the emergency light in the hole with the accessory. Once the cut and the wiring connection is done, you only have to insert the luminaire into the hole by pulling back the spring clips that will hold the emergency light.
• Surface: Replaces old emergency lights. You will only need to install it by connecting the wiring to the wall or ceiling in a quick and easy way.

Where to place the emergency lights?

The regulations stipulate places that must have emergency lighting: any premises that are occupied by more than 100 people, premises containing general fire protection equipment, general plant rooms in public buildings, places containing switchboards or switchgear for the lighting system, etc.

• ✔ Emergency exits.
• ✔ Car parks and storage rooms.
• ✔ Emergency stairways.
• ✔ Shops and department stores.
• ✔ Warehouses.
• ✔ Offices.