Integral plaster luminaire with wave effect - 200 x 200 mm - GU10

Our line of plaster integrated lighting consists of products designed to be installed in plasterboard ceilings and walls, in order to achieve continuity between the installation surface and the luminaire, free of edges and joints. In this way, the lighting is completely integrated into the environment, with uniform and clean finishes.

The installation of these products is simple, it only requires to make a hole in which we can embed or recess our luminaire. Once installed, it is enough to polish, putty the surrounding area and paint, so that the product is fully integrated into the environment.

In addition to the aesthetic aspects offered by this product line, plaster has several advantages over other materials used in recessed luminaires, since it is unalterable over time, non-flammable, non-toxic, non-conductive of electricity, and can be painted in the desired color.

Our integrable luminaire in plaster with wave effect presents an original design that exalts the beauty and purity of white, making it a timeless and minimalist piece of lighting and decoration.

Main product features:

• Recessed and integrable to plasterboard ceiling.
• Cutting dimensions: 203 x 203 mm
• Supports a GU10 bulb (not included)
• Dimensions: 200 x 200 x 45 mm
• Color: white

Steps for the installation of the plaster ceiling light:

Step 1 - Make a ceiling cutout according to the model specification. For this luminaire the cutout size is 203 x 203 mm.

Step 2 - Position the luminaire in the cavity.

Step 3 - Place the side wings of the luminaire into the cavity.

Step 4 and 5 - Screw the side wings to the plasterboard and check that the product is correctly fixed.

Step 6 - Fill and putty the joints of the cavity with sealing paste and joint paste.

Step 7- Sand and paint with the desired color.

Finally, the electrical connections must be made and the light bulb must be installed.