A60 E27 RGBW 9W LED Bulb A60 E27 RGBW 9W with remote control
E27 A60 RGBW 9W LED bulb with remote control.
Bulb A60 RGBW 9 Watts with remote control included. Dimmable bulb. Very easy to use remote control, with color change, and visual effects. Ideal bulb to create environments and decorative atmospheres thanks to its RGB+W configuration. No configuration required. Note that if disconnected from the mains, the color is not maintained and ends in white. To maintain the color, it must be turned on and off with the included remote control.
The RGBW LED bulb comes with 5 dimmable brightness levels, 16 preset colors to choose from (green, red, blue, yellow, etc.) and a white light to choose from. You can choose your favorite color according to your needs and desires.
Remote control with batteries included.
Warranty 2 years.
- Socket: E27.
- Voltage: 220V.
- Power 9W.
- Voltage: 220-240V/AC.
- Lumens: 806.
- Dimensions: Ø60x120mm.
- IR remote control and battery.
- IP20.
- Opening angle of the light beam of 220º.
The RGB+W LED bulb allows two lighting modes to create the atmosphere we want at any time and need, generating an optimal visual experience. The flash mode offers a stage effect, for parties, concerts, etc. The smooth mode offers automatic light color cycle change in different environments and shades.
The remote control integrates 21 IR control keys, dynamic modes, brightness adjustment, timers, multiple color, and much more. Including up to 16 different fixed colors to select from (red, green, blue, yellow, orange, white, purple, etc.), and up to 5 levels of dimmable brightness to provide LED bulbs to suit your needs at any given time.
It offers different environments. 3 lighting modes (fixed, RGB fade, Flash, Smooth). In addition, the IR remote control also allows you to set the time and adjust the speed of the lighting mode.
Simple and efficient design. Ideal decorative bulbs for bars, clubs, restaurants, cafe, events such as birthday parties.
RGBW bulbs with 9W power, E27 socket with dimensions of Ø60x120mm. Designed with SMD LED technology, high power and energy efficiency. With degree of protection IP20 for indoor use. Opening angle of the light beam of 220 degrees. Luminous intensity of 806 lumens. With optimum color rendering.
Its lens is opal and its exterior is made of aluminum and polycarbonate. It offers multiple color changes and allows remote control.
RGB-W
85-90
ROHS
Questions
P: Question: |
Is there a LED bulb A60 E27 RGBWW with remote control (reference: B1395-E27-CONTROL) with more power than 10W? (Keeping the same dimensions). |
---|
R: Answer: | There are no higher wattages. Please note that 10W of LEDs are equivalent to about 80-90W of conventional incandescent bulbs. |
---|
P: Question: | Do you have something similar, from 2700 to 4000K, dimmable with colorless control, but 1500 lumnes minimum? |
---|
R: Answer: | The most similar is the O485495 with mobile APP, but without remote control. |
---|
P: Question: | Can you make your own colors? I saw that the controller had 16 colors but also R G B and W buttons. And if they are not to make your own colors, what are they for? |
---|
R: Answer: | The colors are preset to those of the controller. No other colors can be configured. |
---|
P: Question: | Do you have only fat hull bulb or also thin hull bulb? |
---|
R: Answer: | This model is E27 threaded. Thread adapters are available |
---|
P: Question: |
The bulb LED bulb A60 E27 RGBWW 10W with remote control, Reference:B1395-E27-CONTROL, the fade mode, which I guess is fading, ie off and on slowly intermittent, does it also work with white (W) or only with RGB? Another question, if the fade effect, is the one I describe, off and on slow intermittent, more or less what is the frequency of on and off per minute? Thanks. Best regards, José antonio Ruiz |
---|
R: Answer: | The modes cycle through the colors. Only the STROBE mode switches on and off in the white light about 30 times per minute . |
---|
P: Question: | Can several be controlled from the same controller? |
---|
R: Answer: | Yes, but control is by infrared signal and the signal must reach the bulb directly or bounced back. |
---|