Our 7W E27 A60 LED bulbs are the ideal solution for efficient and automatic lighting in transit areas. With advanced sensors, these bulbs turn on when motion is detected and only in low light conditions, offering convenience and energy savings.
Automatic motion detection: Microwave motion sensor with a range of up to 6 meters and automatic shut-off after 60 seconds without detection.
Twilight sensor: Operates only in conditions of less than 20 lux. For the first few minutes after power-up, the sensor adapts to the environment, so it can operate even in daylight. After that, it will operate only in dark conditions.
Energy saving: Replaces 60W incandescent bulbs, saving more than 88% in electricity costs.
Efficient illumination: 500 lumens with a 180-degree opening angle for a homogeneous and defined light.
Easy installation: Compatible with E27 socket, instant on and long life of over 25,000 hours.
Color temperature options: Available in warm white (3000K) and neutral white (4000K).
Yes, but each bulb is independent and the synchronization times may not be the same and may detect at different periods.
P: Question:
I have one installed in a distributed of step, stop to be microwave detection m, detects presence behind wooden doors. is there any way to decrease the detection capability?
Greetings
R: Answer:
This model has no sensitivity adjustment possibility. It should be replaced by a PIR sensor model, not a microwave sensor.
P: Question:
Wide or narrow thread is indistinguishable.
R: Answer:
It is E27 thread (I think it is the one identified as wide).
P: Question:
With daylight or other light source, does it also light up when there is movement?
R: Answer:
No. It turns on only when the ambient light intensity drops below a minimum (factory preset level).
P: Question:
The bulb if it is in the ceiling at 2 meters high and in a horizontal soffit works well and how long it turns off, thanks.
R: Answer:
It can give detection problems or false detections in horizontal position and with diffusers. As indicated on the website: after 60 seconds without motion detection the LED bulb will turn off .
P: Question:
Does the motion sensor work if the bulb is inside a glass lantern?
R: Answer:
It should work if the glass is not too thick, the detection system is microwave.
P: Question:
Does this bulb work well, for example, in a doorway and in a horizontal position?
R: Answer:
The longest detection range is vertical, but depending on the location it can detect horizontal but at a shorter range. The bulb is for indoor use if it is not protected.
P: Question:
the motion sensor of this bulb will work if the bulb is at 2 meters height and the bulb is facing the ceiling.
R: Answer:
It is not intended for this use, it may cause detection errors.
Page: 1
Can't find the answer you're looking for?
Your Question has been successfully sent our team. Thanks for question!
.jpg){kind=icon}
.jpg){kind=icon}
