CCT Adjustable Universal LED Ceiling with Sensor 18W

18W Mini LED Ceiling Light with Sensor and CCT System

The multifunctional LED ceiling light has an elegant and modern design with a width of only 19mm. With multiple functionalities it allows both surface and recessed installation. It can be used as decorative or main lighting in any indoor room.

In recessed installation, the LED ceiling light is adjustable between Ø65-Ø205mm. With small dimensions and a power of 18W, the LED ceiling light has a total luminous intensity of 1710 lumens.

High quality ceiling light with high energy efficiency and a beam opening angle of 120 degrees. Three sensor modes in one: motion sensor, twilight sensor and on/off sensor.

The LED ceiling integrates a temperature selector on the back. With the CCT system we can choose the color temperature we want among the different shades: warm 3000ºK, neutral 4000ºK and cold 6500ºK, just by changing the position of the selector.

It is not dimmable and is prepared against electromagnetic interference EMC that may interfere with other wave systems such as Wifi, radio, etc..

The LED ceiling lights come with a PIR sensor, infrared detection with a detection distance of 3.5-4 meters. The detection angle is 100 degrees and has a duration of 30/180 seconds. After 30 or 180 seconds, the light will turn off.

Sensor configuration buttons.

• ✔ Switch 1: Sets the sensor duration time between 30 or 180 seconds.
• ✔ Switch 2: Sets the motion sensor mode between night motion sensor mode or all motion.
• ✔ Switch 3: To decide whether you turn on or off the sensor functionality.

LED ceiling light with modern design, exclusive for indoor, with IP20 protection degree. LED ceiling lights perfect for installation in any indoor ceiling. Widely used in stores, hotels, homes, storefronts, supermarkets, etc..

Multifunctional LED panel with easy installation

Make sure the power supply is disconnected before starting work.

RECESSED MOUNTING

• Before cutting, make sure that the hole does not affect beams, pipes, cables or other building services.
• Adjust the extension spring positions to suit the cutout as shown in Figure 2 and 3 (65mm-205mm).
• Connect the power cable to the terminal in the junction box: brown to live, blue to neutral.
• Offer the luminaire up to the cutout.
• Hold the retaining springs vertically, push the fixture through the cutout until the springs drop down through the top of the drywall.

SURFACE MOUNTING

• Rotate and remove the fixture bracket.
• Remove the extension springs from the bracket.
• Attach the bracket to the ceiling or wall surface with screws as shown in Figure 5.
• Drill a hole in the wall or ceiling for the junction box.
• Plug the supply into a suitable junction box: Brown to Live, Blue to Neutral.
• Attach the fixture to the bracket using a twist and lock mechanism.

Multifunctional Panel Features