.jpg){kind=icon}
.jpg){kind=icon}
-25%
Outdoor garland IP44 10 meters connectable in series 10x E27
SKU:L1700
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
Outdoor garland IP44 10 meters connectable in series 10x E27
LED bulbs NOT included
Garland cable for outdoor use, with 10 E27 sockets to install bulbs up to 60W power. The sockets are spaced 1 meter apart. The initial cable, detachable, has a length of 1.5 meters. This cable can be disassembled because, if you want to make a long run of garland, you can splice several models together, looking like a single garland with all the bulbs separated at the same distance. You can join several wires together (in indivisible modules of 10 meters).
The garland cable is reinforced for outdoor use, both in the plugs, connections and sockets, with with IP44 waterproof rating, so it is suitable for outdoor mounting as it withstands rain, humidity, cold, dust and dirt. Even so, you must be sure to use bulbs whose globe fits the socket and is completely imprisoned (the use of candle bulbs, reflector bulbs or bulbs with special shapes is not recommended).
Use our 1W decorative LED bulbs: they are available in many colors. You can also use LED bulbs type A60, Edison or Globe, and if you want to give a special touch to your celebrations and events, use spherical filament bulbs with transparent glass. You will find a wide range of E27 LED bulbs by clicking here.
Nominal Voltage (V)
220 - 240 V/AC
Maximum power (W)
60W
Socket
E27
IP
IP44
Dimensions (mm) Lxlxh
10000x200
Material
Plastic
Use Outdoor
Yes
Temperature range
-20°C ~ +40°C
Frequency of use
Intensive
Certificates
CE
ROHS
ROHS
Warranty
According to legal guarantee: 2 years
Discount
Decorative lighting
Decorative lighting up to 40% off
Decorative lighting up to 40% off
Questions
| P: Question: | Is it possible to get a 30 m garland and with 50 cm intervals between bulbs .with E27 socket.if it is a if you can tell me how much it costs.thank you. |
|---|
| R: Answer: | The garland is not adjustable in size. The L400 model can be mounted at any size. |
|---|
| P: Question: |
Good morning what bulb would you recommend me of warm light but that illuminate since it is an area of the garden that has no light and it is for a pergola very covered with green and not very high. Thank you |
|---|
| R: Answer: | The garlands are more for decorative use and ambient light, you may be interested in the bulb of the ref. 64908100 |
|---|
| P: Question: | How many watts of LEDs can be placed in each socket, and in total the 10? |
|---|
| R: Answer: | The maximum consumption of the whole garland is 2200W. The maximum power per socket can be between 100-150W, depending on the power factor of the bulbs. |
|---|
| P: Question: | hello are these lights dimmable? |
|---|
| R: Answer: | It is a garland without bulbs, dimming will depend on whether the bulbs are dimmable (the installation needs a TRIAC dimmer). |
|---|
| P: Question: | I am looking for garlands with bayonet sockets for outdoor led bayonet bulbs. |
|---|
| R: Answer: | The garlands have E27 sockets. |
|---|
| P: Question: | Hi, do the sockets hold bulbs with enough power to provide light? Or only low intensity to give ambient light? Thank you! |
|---|
| R: Answer: | The garland can withstand a maximum of 2000 watts. |
|---|
| P: Question: | Which lamps are suitable for outdoor use in the rain? |
|---|
| R: Answer: | The sockets are IP65, so when you connect the bulbs, they will be protected. https://www.barcelonaled.com/pt/lampadas-led/lampadas-led-e27/ |
|---|
| P: Question: |
The distance between the two support points is 15 meters. The description says that I can attach more than one garland, but my doubt is if for that distance, the cable alone supports it or should I use another support element such as a wire that goes through the sockets. Thank you very much. |
|---|
| R: Answer: | For longer distances you will need to place it on a weight-bearing element such as a wire. It is recommended that the power cables do not support the weight and should be mounted on an additional support line or a rigid structure to support the weight. |
|---|
| P: Question: |
Hi. My question is if you have cable to interconnect to the garlands and separate them from one run to another. Best regards |
|---|
| R: Answer: | No intermediate connections available |
|---|
| P: Question: |
Good morning I need 5 strips to join them. Do I need a connector or does each strip come with one? thank you |
|---|
| R: Answer: | As indicated on the website: The garland comes equipped with European SCHUKO type plug and both the start and end comes equipped with male/female connector to easily join the wires together. |
|---|
Page: 12
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
