Rigid RGB LED Strip 56cm 10W 24V-DC for double-sided signage IP65

RGB 10W 24V-DC rigid LED strip for IP65 backlighting of light boxes

Rigid aluminum bar with integrated LED modules on its surface, for side mounting in double-sided backlit light boxes. The installation on the sides, together with the 45º x 15º asymmetrical optics, offers optimum diffusion and use of the luminous flux over the entire surface of the cube, without dark areas or shadows.

This product is ideal for use as a floodlight or to illuminate light boxes for signage.

The rigid LED strip consists of high efficiency and high brightness CREE SMD3030 RGB LED chips. The chips are 8cm apart (each bar consists of 7 chips), and thanks to the side angle of 45º, they can cover a larger lighting surface with less chips, less consumption and less heat in the whole set. All this leads to energy savings and a longer life of the product over time. Thus, it is sufficient to place the light bars on 2 of the four sides of each cube, it is not necessary to cover the entire perimeter. The design of the optics is designed to cover a distance of up to 1.8 meters, and with 4 bars it is possible to illuminate up to 1m2 of luminous cube.

The set includes, in addition to the bar, a starter cable and a connecting cable between bars. The connection between bars is made by means of the connecting cable, which allows the connection of up to 20 bars of 56cm with only one power supply. The set requires a 24V-DC power supply and adequate power to cover the power consumption of the set. Also, don't forget to buy an RGB controller according to your needs.

The connectors have dual pins for each channel. This allows you to create longer runs, balancing the amperage and avoiding voltage drops.