.jpg){kind=icon}
.jpg){kind=icon}
-50%
Flexible LED Neon 24V DC - 10X10mm - 5 meters - IP67 - 14W/m - Vertical Curvature
SKU:B3370-VE
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
Our LED neon incorporates a silicone cover, with an opal finish, which disperses the light in a similar way to the old neon signs.
It has a size of 10 x 10 mm, and incorporates SMD2835 LED chips, offering high luminosity and efficiency.
It has a flexible design with the possibility of cutting at the marked points (every 5 cm), which gives it great versatility when assembling figures.
By incorporating LED technology, it allows significant energy savings compared to conventional neon lights, since it emits virtually no heat and also improves the optical effect by the use of silicone, thus resulting in greater luminous efficiency.
Our flexible LED neon can be applied in multiple projects that require a great visual impact, such as the creation of illuminated signs, signage, to decorate or highlight lines of structures of any building, restaurant, bar or commerce in general.
It should be noted that this neon emits light from its upper face, so it allows vertical bending, and therefore, it is suitable for projects that adapt to this feature.
|
Main characteristics of the product:
|
Please note that certain technical characteristics such as power or CRI may vary according to the color/shade of the product. For further details, please refer to the test reports attached in the "Downloads" section, or contact our sales advisors.
Nominal Voltage (V)
24V-DC
Power/m (W/m)
14
Lumens (Lm)
1260;1142;950
Kelvin (K)
2700
4000
6000
4000
6000
Beam angle (º)
120
IP
IP67
Hue
Blue
Cool white
Green
Neutral white
Red
Warm white
Cool white
Green
Neutral white
Red
Warm white
Dimmable
Yes
Driver
Internal
Cutting distance (mm)
50
Material
Silicone
Use Outdoor
Yes
Temperature range
-20°C ~ +40°C
Frequency of use
Intensive
Certificates
CE
ROHS
ROHS
Warranty
According to legal guarantee: 2 years
Questions
| P: Question: | Hi. Can I embed the neon with reference. B3370-BF in the floor profile with reference BPERF27X11 or does it have to be in the floor profile with reference BPERF21X26? |
|---|
| R: Answer: | The profiles are for LED strips, the neon has the flexible profile ref. BPERFLEX10X18-M and the clamp ref. B3326. The neon fits in the BPERF21x26 profile, but it is not fastened. |
|---|
| P: Question: | The Flexible LED Neon 70W 10X10mm IP67 - 5 meters has connection cables at both ends. Is it enough to connect the ones at one end to the power supply or do I have to close the circuit in some other way? If only the ones at one end are necessary, what to do with the wires at the other end once the installation is done? |
|---|
| R: Answer: | The Neon has cable at both ends to join them together, connect repeaters, etc. .... For 5 or 10mts you can connect only on one side, if you have no noticeable loss of light at the end of the strip. You can cut the cable at the end of the Neon and strand without short-circuiting between them. |
|---|
| P: Question: |
The neon is 24v I need to connect it to 12 v Motorhome. What adapter do I need ? Thanks |
|---|
| R: Answer: | These neon models are 24vdc. You may be interested in a 12vdc led strip plus some silicone sleeve. We do not have voltage adapters |
|---|
| P: Question: | good afternoon is this tape dimmable thank you |
|---|
| R: Answer: | Yes, all neons and LED strips are dimmable. |
|---|
| P: Question: | Good I would like to know if you can connect directly to the installation of a boat to 12 volts greetings |
|---|
| R: Answer: | This model is for 24vdc voltage, not 12v. |
|---|
| P: Question: |
I would need to know if you have flexible neon led RGB 220v, with control for color change. I would need the LEDs to be as powerful as possible. And if you ship to Argentina. I look forward to your answer. |
|---|
| R: Answer: | We no longer sell 220v RGB neon. |
|---|
| P: Question: | The flexible neon, part number: B3370-270, can be powered directly from a lead-acid battery bank 24 vdc ? |
|---|
| R: Answer: | Yes, its working voltage is 24vdc. Depending on the capacity of the batteries, their usage time and light output may vary. |
|---|
| P: Question: | hello does this product need a transformer '? at what voltage? |
|---|
| R: Answer: | Hi Oleh, You need a 12v or 24v power supply You can find the power supply for the led neon with the reference: B1563-75 (12V) or B1566-75 (24V) Greetings, |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
