.jpg){kind=icon}
.jpg){kind=icon}
IP67 watertight sleeve x1m for 10mm LED Strip
SKU:B1500
€3.49
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
10mm IP67 waterproof sleeve for 12V or 24V LED strip to waterproof your strip.
With the silicone sleeve for LED strip is achieved a degree of IP67 waterproofing, allowing its use in both indoor wet areas (bathrooms, kitchens, etc.) and outdoors, making the strip withstand moisture and rain without problems.
To achieve the desired degree of watertightness in the LED strip, it is essential to place end caps at the beginning and end of the sheath, sealed with silicone, to prevent water from entering inside.
To facilitate the process of sheathing inside the sheath for the LED strip we will find a guide cable, which simply will have to be tied to the LED strip at one end of the sheath and pull the cable at the other end, until the strip is completely inserted inside the sheath. Once this is done, just seal the ends with the end caps with silicone and salt the wires through the holes of the cap.
Measures 14x4mm (width x height)
- Price per 1 meter length
- Flexible and transparent silicone.
- Allows any type of 12 or 24V LED strip to be made waterproof.
- Easy to place by means of a guide wire inside.
Questions
| P: Question: |
Good morning, I would appreciate if you confirm me if you have in stock to deliver as soon as possible. It would be to deliver a run of 15metros, which then adapt it to my needs, 5 plugs with output of two wires for this case and 5 blind plugs. I am waiting for your response to finalize the order. Best regards. José Pagés. |
|---|
| R: Answer: | For availability of the waterproof case, or to place an order, please contact comercial@barcelonaled.com or call 932418081. |
|---|
| P: Question: |
I have the following questions: 1. Is it possible to buy a 4 meter length of sheath in one piece? If so, how can I order it? I have read that a 30 meter length is not recommended, but can a 4 meter length work well? 2. The led strip has an adhesive tape to stick it on the surface, however it will be unusable when introduced in this case. Does it include an adhesive tape to stick it? Can you offer any alternative in this case (that avoids drilling holes in the wall/furniture where it will be placed if possible)? Thank you very much |
|---|
| R: Answer: | The watertight sheath is sold by the meter (not cut). It is necessary to acquire a start and end cap and silicone to make it watertight if it is going to be used in humid environments. It is for 10mm strips and to place it on a surface it must have accessories (silicone staples). |
|---|
| P: Question: | Good morning, is it possible to buy a single 30-meter length of this silicone sleeve? Thank you |
|---|
| R: Answer: | The watertight cover can be purchased in long runs, but it is not advisable to insert such long LED strips as the corrugation of the cover prevents the strip from entering inside. |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
