.jpg){kind=icon}
.jpg){kind=icon}
Aluminum profile for LED strip surface 16x16mm for corner
SKU:BPERF16X16
€7.99
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
Aluminum profile for LED strip 16x16 surface especially suitable for installation in corners.
Ideal profile for installing LED strips in corners / corners such as shelves. The light is directed at an angle of 45º through its opal optical diffuser. This prevents the light from dispersing and illuminating areas that we are not interested in, such as walls, offering greater luminosity to the room.
AVAILABLE IN BARS OF 1 METER OR 2 METERS
Questions
| P: Question: |
Can it be cut to a desired size? Thank you. |
|---|
| R: Answer: | Hello, if you have the right tools to cut aluminum, there is no problem to cut the profile. Thank you very much!
Barcelona LED: Sergi| 04/10/2024 |
|---|
| P: Question: |
How is the luminaire installed? Does this luminaire have a transformer so that it can be connected to a light switch? |
|---|
| R: Answer: | Hello, The product only represents the 2m long aluminum rod. The LEDs inside are not included. Barcelona LED: Angélique David| 25/05/2024 |
|---|
| P: Question: |
I would like to know if this profile can be used with a LED strip LED Strip 220V - 950W (6000xSMD2835) 12mm - IP67 - Roll 50 meters - Cut each 10cm Reference: B1550-50-270, which measures 12mm wide and 4.5mm thick. |
|---|
| R: Answer: | The strip is 12mm and the profile base is 10mm, the strip would touch a little the profile wall but as it is angled it can be placed (you have to make sure of the tightness of the strip if you make cuts). |
|---|
| P: Question: | No 90º elbows |
|---|
| R: Answer: | For that model not only for 17x8mm |
|---|
| P: Question: | This profile could be placed in a hole only holding it on one side and the other side of the profile is visible? And could it be painted? |
|---|
| R: Answer: | Yes, the clips are only anchored to the ceiling or wall on one side. There is no inconvenience in painting on the external aluminum. |
|---|
| P: Question: |
Can 5 meter bars be served? Thank you |
|---|
| R: Answer: | No, the profiles are Max 2 meters |
|---|
| P: Question: | Hello, do you have profiles for 12 mm LED strips? |
|---|
| R: Answer: | We only have this model in the corner, but given its shape, the 12mm strip fits without problems. |
|---|
| P: Question: | Good to place in the upper corner of a comerdor worth this product? that the effect is all linear. You can splice and make emplamer of 90 degrees? |
|---|
| R: Answer: | It is a corner profile, there are no 90º joint angles. |
|---|
| P: Question: | If I want to put a neon LED strip in the entire lower module of the kitchen (4 meters), do you recommend using a profile? |
|---|
| R: Answer: | It depends on the Neon, probably in neon it will not fit well in that corner profile if it has a diffuser. Normally they have fixing clips or gutters. |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
