.jpg){kind=icon}
.jpg){kind=icon}
Intelligent LED Strip IC RGB - 7.2 W/m - Width 10mm - IP67 - 5 meters
SKU:B1544-30
€24.45
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
Programmable RGB 12V RGB IC LED Strip 7.2W/meter
The RGB digital IC LED strip allows the creation of lighting effects and programs through a programmable controller. It includes SMD5050 RGB LED chip and each 3 LEDs has a WS2811 control chip, so color effects can be programmed for each group of 3 LEDs.
The LED strip IC consists of a 10mm wide PCB, inside a transparent silicone sleeve that turns the LED strip into an IP67 rated luminaire, suitable for outdoor installations.
The PCB can be cut every 10cm. In this way, it is possible to make custom assemblies and cuts according to the needs, and to make the necessary splices. For this LED strip, we recommend that splices are always made by soldering. It is very important that the strip is well protected and not subjected to extreme bending, stepping or bending, as this may cause the failure of the control chip and result in groups of LEDs off.
Usage and Applications of RGB IC LED Strip IC Strip
IC LED strip is commonly used in bars, discos, restaurants, music clubs and concert halls, among others. The effects can be controlled by a basic controller with remote control, with more advanced controls via mobile app, or by DMX controllers. Our technical sales department will be able to advise you on the methods of use and control.
Questions
| P: Question: |
Good afternoon, I am looking for 30m of submersible RGB led strip to place it on the edge of a pool. This 5m digital LED strip can be "spliced" to get the 30m I need? Do you have any other better solution? Any advice? Thanks, I look forward to hearing from you. Best regards. |
|---|
| R: Answer: | This model of strip can be connected with 30 mts (depending on the controller) and must be connected to 12Vdc every 5 meters of strip. (we do not recommend it for swimming pool installations, nor to keep submerged any model of strip). |
|---|
| P: Question: | What source and controller is needed for this strip? |
|---|
| R: Answer: | The necessary accessories of the ic led strip, depend on the amount of meters that you want to mount, for this 5mts coil you need a 12v source of minimum 36W and a controller for intelligent strips, example B1480 or B1568. |
|---|
| P: Question: | what controller do i need for this led strip? |
|---|
| R: Answer: | You can control the LED strip IC with a DMX controller.
Barcelona LED: Marc| 04/02/2020 |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
