LED Strip 12V-DC 72W 10mm multicolor RGB IP67 (SMD505050 60ch/m) 5 meter roll

SKU:B1546-IP67
Has superado el límite de unidades
In stock 214 units
Data sheet

RGB LED strip at 12V DC, total power 72W, width 10mm (12mm with IP67 silicone coating) and luminous angle 120º. It has 300 SMD5050 LED chips (60LED/m) cut every 50mm.

  • 12VDC
  • RGB
  • 72W - 14,4W/m
  • IP67
Shipping to Africa available
public
For any shipping requests to Africa, please contact our sales department at:  comercial@barcelonaled.com

12V-DC 72W RGB LED Strip with 300 SMD5050 Chips

  • 5 meter reel
  • RGB multicolor lighting
  • 60 chips/meter SMD5050
  • Cutting distance 50mm
  • IP67 protection degree
  • PCB width: 10 mm
  • Strip width: 12mm with silicon coating
  • Flexible, high brightness and luminosity
  • Power supply required (not included)

The LED strip is an element that integrates into your projects with minimal visual impact, creating indirect and diffused lighting that highlights architectural elements.

SMD5050 RGB LED strips are medium/high power and low power consumption. Average power consumption is estimated at 14.4 W/m, with all color channels activated at maximum. They can be cut every 50mm, which allows them to be adapted and spliced according to the needs of each project.

Installation of the IP67 RGB 12V siliconized LED strip:

The IP67 SILICONED LED strip does NOT come with self-adhesive tape on the back. The mounting should be done by aluminum profiles, or with transparent flanges for fixing with nails/screws. As it is a flexible strip, it can be used in tight curves. The mounting against the power supply can be done by means of connectors or by soldering the cable directly to the power supply. In case you want to install it outdoors, be sure to protect the soldering, cuts and splices with the necessary sealing.

For a complete LED strip installation you will need a controller, a power supply and, optionally, aluminum profiles (surface or recessed). It is estimated that for 12V LED strips, if you want to make stretches of more than 5 meters, you will need to install additional power supplies and signal amplifiers to avoid voltage drops.

In the specific case of RGB strips, you will have to install a specific color controller. We have multiple options in RGB controllers, depending on your budget and the complexity of the installation. Consult with our sales staff to find the most suitable RGB control system for you.

Recommended uses:

  • Highlighting architectural contours
  • Lighting under furniture and shelves, showcases, showcases, corridors, shop windows.
  • Aisles, shop windows, with indirect lighting.

Nominal Voltage (V)
12V-DC
Power (W)
72
Power/m (W/m)
14,4
Beam angle (º)
120
Lifetime (h)
25000
IP
IP67
Dimensions (mm) Lxlxh
5000x12
Frequency (Hz)
50 - 60
Hue
RGB
LED Type
SMD 5050
Dimmable
Yes
No. of chips/metre
60
Track width (mm)
10
Cutting distance (mm)
50
Use Outdoor
Yes
Temperature range
-20°C ~ +40°C
Adhesive
No
Frequency of use
Normal
Energy efficiency class
A+ (2021)
Certificates
CE
ROHS
Warranty
According to legal guarantee: 2 years
Barcelona LED

Questions

P: Question: What do you advise me to place a 3 meters leed strip for a Caravan in Esterior , Thank you very much .
R: Answer: It depends on where it is to be connected. Any siliconized model with IP65
P: Question: When will it be available?
R: Answer: For availability, please contact comercial@barcelonaled.com.
P: Question: Hello good morning. Could it be connected directly to the car battery?
R: Answer: Yes, it can be connected as long as it is 12VDC.
Page: 1

Can't find the answer you're looking for?
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form