.jpg){kind=icon}
.jpg){kind=icon}
LED Strip 12V-DC 72W width 5mm multicolor RGB IP20 (SMD3535 72ch/m) 5 meter roll
SKU:B1547-5-IP20
€24.95
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
LED STRIP 12V DC 72W PCB 5MM 5 METERS RGB IP20 (SMD3535 72CH/M)
The LED strip is an element that integrates into your projects with minimal visual impact, creating an indirect and diffuse lighting that highlights the architectural elements.
SMD3535 LED strips are low power and low consumption. Average consumption is estimated at 14.4W/m. They can be cut every 41.3mm, allowing them to be adapted and spliced according to the needs of each project.
Installation:
The LED strip comes supplied with 3M self-adhesive tape on the back. Place it on a smooth, non-porous surface and make sure to clean it beforehand. As a flexible strip, it can be used in tight bends. Mounting against the power supply can be done using connectors or by soldering the cable directly to the power supply.
For a complete LED strip installation you will need a controller, a power supply and, optionally, aluminum profiles (surface or recessed). It is estimated that for 12V LED strips, if you want to make stretches of more than 5 meters, you will need to install additional power supplies and signal amplifiers to avoid voltage drops.
Features of the RGB 5mm LED strip:
- 72W 12V LED strip
- 5 meter reel
- 72 chips/meter SMD3535
- Cutting distance 41.3mm
- IP20 protection rating
- PCB width: 5mm
- 3M self-adhesive
- Flexible, high brightness and luminosity
- Requires power supply (not included)
Recommended uses:
-
Highlighting architectural contours.
-
Lighting under furniture and shelving, showcases, display cases
-
Aisles, shop windows, with indirect lighting
Recommended use of aluminum profile 8x12 for surface / 13x12 for recessing
Questions
| P: Question: |
Good morning. I want to use this size led strip in a bathroom to illuminate a small joint area to turn on the main light. Should I use the controller every time I turn on the main light after turning it off? And ......With each on and off does the controller remember what color to turn on? Thanks |
|---|
| R: Answer: | The RGB LED strip needs a 12v power supply and an RGB controller, in principle the controllers keep the last option chosen. It must be taken into account that it is a led strip with protection degree ip20 not suitable for wet areas or with water contact. |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
