Hello good morning, I would need 2-3 m of this model of strip I have seen in the rolls of 5m SMD5630, I do not think I would give me problem in cutting and then splice the connector to the current (it is to insert into aluminum trunking profile plasterboard ceiling to 2.40m in domestic housing in a specific area of the living room) What would I need apart? My idea is to buy a dimmable switch, and apart what you recommend me for the final installation ...: diffuser cover to cover leds in trunking? power supply? connectors ... etc... Thanks
R: Answer:
This model allows cutting every 5cm (by the cutting area). The strip is 15W/mt for 2.4mt you will need a 12Vdc power supply higher than 36W. A controller for Monocolor strips e.g.: RF86-01. The profile can be ref. BPERFALP068-R. For quotation, purchasing and customer support please contact comercial@barcelonaled.com
P: Question:
Hi. When will the 10000K be available? ????
R: Answer:
This model is out of stock
P: Question:
Can it be installed in a car?
R: Answer:
If the strip receives 12vdc it works normally. Keep in mind that it is not for outdoor use and that it should be placed on a surface that dissipates heat, such as the body in this case.
P: Question:
hello, I would like to know if the led strip can be joined with another one, as well as cut to size.
R: Answer:
If they can be cut and spliced in the cut area where the copper track is visible, in the case of this strip model, every 5 cm.
P: Question:
I would like to know if this strip comes with the transformer, ready to work, and if not, what are the prices of white med strips t meters with the power supply/transformer ready to use?
R: Answer:
The strips are sold in 5mts reels without power supply, prices are available on web.
P: Question:
I see that there are 6 shades but I need to know the color temperatures of each one and I can't find it.
R: Answer:
They are available in the technical data section
P: Question:
Good afternoon, two questions.
Are they dimmable?
How many lumens per meter, thank you?
R: Answer:
All LED strips are dimmable. It has about 1619 lumens per meter, about 107lm/w. The ratio per square meter is based on LUX and depends on height and other photometric factors.
P: Question:
Good afternoon, if I had to splice 2 rolls (I need 7m of strip) I would have to buy a controller for 120w?
Thanks
R: Answer:
This model of strip is 15w/m, for 7 meters of strip you would need a power supply of at least 105w, our closest model above is 120W. If you need a controller to regulate the intensity of the strip, it must support the power of the strip, in this case 105W.
Note: We do not recommend more than 5 linear meters in 12v strips, and 10 linear meters in 24v strips, due to voltage drop loss.
Page: 1
Can't find the answer you're looking for?
Your Question has been successfully sent our team. Thanks for question!
.jpg){kind=icon}
.jpg){kind=icon}
