.jpg){kind=icon}
.jpg){kind=icon}
RGB 12V RGB LED car kit with WIFI bluetooth mobile control
SKU:B1601-WIFI
€9.95
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
Car LED Kit for RGB 12V and mobile control via WIFI
With the LED Kit for RGB 12V car with mobile app control, you can give a touch of modernity to the interior of your vehicle. Composed of 4 LED bars of 9 chips each, an infrared RGB controller and a 12V connector for universal cigarette lighter socket.
Easy assembly: The strips are fixed by 3M adhesive to the surface of your choice (under the feet, dashboard, roof, trunk ...) and the connection is made directly with the adapter for the cigarette lighter socket. An ON/OFF button included in the adapter allows you to control the switching on and off of the set.
The color control is done by a controller included in the cable, which is synchronized to the mobile application (just scan the QR code printed on the back of the controller from your cell phone). You have 7 colors that can be combined with each other, obtaining thousands of possibilities. The controller allows you to perform effects such as flickering, strobe, smooth translation and blurring (Flash, Strobe, Fade, Smooth).
Length of the strips:
- 2 cables of 2 meters
- 2 cables of 1.5 meters
- Length of each LED strip: 12cm
The LED strips are protected with IP67 rating, so they can be eventually installed outside the vehicle. The IR receiver controller must be protected inside the vehicle.
Please pay attention to the applicable traffic regulations, in some countries it is not allowed to install non-regulated lights on the outside of the vehicle.
Questions
| P: Question: | good morning, I wanted to know if I can cut two of the LED strips, as I only wanted to put one, and incidentally know if the application that I have to download is well detailed because by the comments that I read people have problems downloading it, thank you very much. |
|---|
| R: Answer: | In this bluetooth model you can download the APP from a QR code behind the controller. Yes you can cut the strips that you are not going to use, but the inner wires must not make contact with each other. You will lose the warranty for tampering. |
|---|
| P: Question: |
Hello, Do you have this same product with USB input? is it possible to turn it off and on through the mobile phone? Thanks |
|---|
| R: Answer: | The RGB LED car kit is not available in USB. It is fully controlled by the phone.
Barcelona LED: Marc| 27/01/2020 |
|---|
| P: Question: |
I would appreciate if you could tell me the URL, or the name of the application for this product, because everything comes in Chinese or English and it is not possible for me to download this app of the product that I bought from you this week and that has already arrived to me. Sincerely |
|---|
| R: Answer: | The LED car kit application is available in English and Chinese.
Barcelona LED: Marc| 17/01/2020 |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
