220V AC COB LED Strip - 10W/m - 12mm - IP67 - 20 meters
This LED strip incorporates COB technology, which allows it to emit a continuous light without visible points. Especially recommended when homogeneous illumination is desired, to work with reflective surfaces or to use transparent diffusers.
With a luminous intensity of 10W per meter, this strip provides exceptional brightness, superior to conventional LED strips.
The LED strip comes in a roll of 20 meters and allows cuts every 50cm, according to the indicated marks. It incorporates 3M self-adhesive on the back to adhere to the desired surface.
For its correct operation, it requires a rectifier that converts alternating current into direct current (Compatible reference: B1536-CI-EU).
In addition, for installation, it's recommended to use the specific connectors corresponding to our products: B1536-TT (strip-to-strip connector), B1536-CTT (strip-to-strip connector with cable) and B1536-L (90º connector).
Product features:
|
Please note that certain technical characteristics such as power or efficacy may vary according to the color/shade of the product. For further information, please consult the attached test reports in the "Downloads" section, or contact our sales advisors.
4000
6000
Neutral white
Warm white
ROHS
Questions
P: Question: | Can two strips be joined together to reach 40 meters? I say this in case it reaches the electrical voltage |
---|
R: Answer: | Hi, if the current is sufficient to power both strips, there should be no problem, thank you very much!
Barcelona LED: Sergi| 30/10/2024 |
---|
P: Question: |
What is the height, the tab says it measures 12mm wide but I need to know the height to know if it fits the profile. Thanks |
---|
R: Answer: | Hi, this strip is 6mm high, 12mm wide and 20 meters long. Thank you very much!
Barcelona LED: Sergi| 09/10/2024 |
---|