.jpg){kind=icon}
.jpg){kind=icon}
LED Strip 24V-DC - 9W/m - single color - 10mm - IP20 - Roll 50 meters - 60 chips/m - Cutting c/10 cm
SKU:B1652-50-270
€149.95
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
LED strip 24 V DC - IP20 for indoor use - Width 10 mm - Roll 50 meters
This LED strip is powered by a 24V DC source. It incorporates a small chip that compensates the voltage drop and thus allows custom assemblies in installations with more than 10 linear meters, where the standard 12V or 24V strip is not enough.
In case of using the complete roll (50 m), it is recommended to feed the LED strip on both sides (start and end). Up to 15 m it is sufficient to feed from one end only.
It is designed according to the highest quality standards, incorporating the latest generation LED technology that allows it to emit a very powerful and homogeneous light.
Due to its IP20 degree of protection, it is suitable for indoor use.
It has three color temperature variants, according to the needs of the space and the atmosphere we want to create: warm white (2700 K), neutral white (4000K) and cool white (6500K).
High power and low consumption
It has a power of 5W/m for neutral and warm white and 9W/m for cool white. It also has a density of 60 chips/meter.
It has a beam opening angle of 120° and a high color rendering index, CRI>80, which allows it to reproduce colors very similar to natural light.
Easy installation and handling
The LED strip comes in a roll of 50 meters. It can be cut every 100mm, according to the indicated markings. The width of the strip is 10mm and has a 3M self-adhesive backing to adhere to the desired surface.
Recommended use for LED strips
Indoor lighting in general
Illumination of showcases, shelves and shop windows
Indoor decorative lighting
Indoor architectural lighting
Any assembly that requires long runs at low voltage.
Lighting of large illuminated signs.
|
Main characteristics of the product:
|
Please note that certain technical characteristics such as power or efficiency may vary according to the color/shade of the product. For further details, please refer to the attached test reports in the "Downloads" section, or contact our sales advisors.
Nominal Voltage (V)
24V-DC
Kelvin (K)
2700
4000
6500
4000
6500
Beam angle (º)
120
Lifetime (h)
25000
Frequency (Hz)
50 - 60
Hue
Cool white
Neutral white
Warm white
Neutral white
Warm white
CRI
80-85
LED Type
SMD 2835
Dimmable
Yes
No. of chips/metre
60
Track width (mm)
10
Cutting distance (mm)
100
Use Outdoor
No
Adhesive
3M
Energy efficiency class
A+ (2021)
Certificates
CE
ROHS
ROHS
Warranty
According to legal guarantee: 2 years
Questions
| P: Question: |
Good morning How can I adjust the intensity of the LED strip without flashing? |
|---|
| R: Answer: | Hello, the following controller FUT035S+ is suitable for regulating this strip |
|---|
| P: Question: | hello i want to use the 50m in 1 piece which control unit do i need thank you |
|---|
| R: Answer: | There are no controllers for that much strip power. You will have to separate with repeaters or sections with several synchronized controllers. |
|---|
| P: Question: | I would like to know the number of lumens per meter |
|---|
| R: Answer: | The strip is at about 920lm/mt |
|---|
| P: Question: | CAN THIS MODEL BE REGULATED WITH DMX DRIVERS? |
|---|
| R: Answer: | With a constant current driver does NOT work for this strip. If it is a 24vdc power supply by DMX control if it can work (see powers). We have DMX decoder for led strips ref. B1561-4. |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
