.jpg){kind=icon}
.jpg){kind=icon}
LED Strip RGB+CCT - 70W - 24V - IP20 - 5meters
SKU:B1554-IP20-RGB+CCT
€24.95
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
RGB+CCT 24V LED strip offers you infinite color combinations.
The RGB+CCT LED strip is one of the most technologically advanced and highest quality strips in our catalog. It incorporates warm, neutral and cold white light diodes, which allows you to use the strip as decorative or ambient lighting, if you use colored light. In the case that you only want to illuminate it is also possible thanks to its white light diodes, with which you will get a very powerful light and in white tones.
Characteristics and installation of RGB+CCT strips:
It is a very powerful strip as it offers us a total of 70W along its 5 meters, it has5050 chip (RGB) 3 in 1 + 2 chips 2835 SMD LED, so each meter has a total power of 14W/m. Operating voltage 24V. Strip width 12mm.
The steps to follow for the correct installation of the RGB+CCT LED strip is exactly the same as for any other LED strip, the only difference is that we must use a specific controller to control the whites both to illuminate in white tones and to shade the RGB colors.
In our LED lighting store we have two types of RGB+CCT controllers. We can not forget that for a perfect installation of our LED strips is highly recommended the use of aluminum profiles for LED strips for better heat dissipation and help extend the life of the LED strip. That is not its only advantage, as you will get a premium finish and have different diffusers to diffuse the light as needed.
Questions
| P: Question: |
Can the strip be cut and spliced with wires? Thanks |
|---|
| R: Answer: | The cut is every 166mm, the strip track can be soldered with wire. |
|---|
| P: Question: |
Good, I have a foseado in a room that measures 25 meters and the customer wants to install the RGBWW strip to be able to put a warm tone. I can not find signal amplifiers to withstand the consumption of the controller. What do I need to be able to light the 25 meters from a controller? Could you tell me the reference of the controller and amplifiers? |
|---|
| R: Answer: | Perhaps you can use the controller ref. FUT039S, currently we do not have RGB+CCT repeaters, only RGBW (ref. B1625-4). |
|---|
| P: Question: | Good afternoon, I would like to know if I can form a strip of 18mtr with the same source and controller. And if so, which controller would it hold? thank you very much. |
|---|
| R: Answer: | In 24v it is not recommended to make more than 10mts linear with a led strip, without putting repeaters or separate circuits with several controllers. |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
