.jpg){kind=icon}
.jpg){kind=icon}
Switch-mode power supply 24V 300W
SKU:B1566-300
€37.95
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
Switching power supply 24V 300W 12.5A IP20
The 300W switching power supply is mainly designed to power LED strips at 24V-DC, as well as any other device or luminaire with 24V-DC working voltage, as long as it does not exceed the maximum power. For all kinds of uses: professional, domestic, commercial, office, catering, etc.
The 24V power supply has a switch on the side to select the input voltage in 115V-AC or 230V-AC and an output voltage of 24V-DC that can be adjusted over ±20%, compensating the voltage drop between the power supply and the consumption point.
Perforated sheet metal housing protecting the power supply from overloads, overvoltages, etc. Power supply with compact dimensions of 200x113x50mm. Input voltage range 115~230V. ±20%. Output voltage 24V-DC with a maximum amperage of 12.5A.
Technical Specifications.
✔ Voltage range: 115~230V ±20%.
✔ Frequency: 50 Hz.
✔ Output voltage: 24V-DC.
✔ Output power: 300W.
✔ Output amperage: 12.5A MAX.
✔ Protection rating: IP20.
✔ Dimensions: 200x113x50mm.
✔ Overvoltage, short circuit and overheating protection.
2018-08-03
Nominal Voltage (V)
110-230
Power (W)
300
Lifetime (h)
25000
IP
IP20
Dimensions (mm) Lxlxh
200x113x50
Frequency (Hz)
50 - 60
Output voltage (V)
24V
Temperature range
-20°C ~ +40°C
Frequency of use
Normal
Energy efficiency class
A+ (2021)
Certificates
CE
ROHS
ROHS
Warranty
According to legal guarantee: 2 years
Maximum intensity (A)
12.5
Questions
| P: Question: | Hello I am putting led strips in a dining room and when I connect these transformers the lights work well but the transformers make a lot of noise, what can be due? |
|---|
| R: Answer: | They are switched sources, you can make noise or high frequency (hiss) depending on the load or if you are dimming the LED strip. |
|---|
| P: Question: | Good afternoon, with this power supply could power 3 LED strips of 5m each? the strip would be 12w/m about 60W per strip, ie for example a corridor of 15m in total, place 3 strips of 5m each and feed them all with this power supply. Thank you. |
|---|
| R: Answer: | If 3 strips are 180W the source is 300W. But it can not be installed linearly more than 10mts. |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
