.jpg){kind=icon}
.jpg){kind=icon}
Three-phase recessed track for LED spotlights - 2 meter bar
SKU:BTTE-200-B
€29.99
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
Three-phase recessed track for LED spotlights (2 meters)
Three-phase recessed track bar of 2 meters. Necessary mounting hardware and accessories are included, and the rail can be cut to length. The design of the recessed rail includes two exterior flashings that act as trims, concealing any defects and imperfections that may result from the cut. Once assembled, the track is flush with the surface, protruding a maximum of 3 mm.
The rails for LED spotlights are versatile, as the spotlights can be installed and manipulated with ease and moved along the rail to the points where it is necessary on each occasion, without the need for an installer and without effort.
We recommend the installation of track spotlights and LED floodlights. They provide intense, homogeneous lighting with a high CRI and very low power consumption, and you can install up to 11 three-phase 45W spotlights in each bar!
Features of the recessed three-phase rail
- Outer dimensions: width 55mm (including fins) x depth 35mm
- Dimensions of the cut-out width for recessed mounting: 35mm
- Voltage: 220-250 V
- Maximum power: 3900 W
- Maximum current: 15 A
- Maximum length to be connected: 20 meters
- Includes screws and plugs for mounting
- Includes starter power supply and end cap
- For indoor use: IP20 rating
Questions
| P: Question: |
Can they be cut if the measurement is not exact? For example if I want a measure of 3.50 meters I can use two of two meters join them and one of them cut half a meter? Thanks |
|---|
| R: Answer: | They are made of aluminum and can be cut on any side of the 2 meters. |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
