T8 LED tube - 150cm - 24W - 140lm/W

T8 LED Tube - 24W - 150cm

LED tube made of nano plastic and ABS with excellent light transmittance, offers instant and flicker-free start-up and turn-on.

It incorporates high performance San'an LED chips, with a total power of 24W. It can replace old 36W fluorescent tubes, reducing energy costs by half.

Its connection is made directly to 230V, so it doesn't need any electronic or ferromagnetic ballast, thus reducing consumption, heat and noise of such transformers.

It has a wide beam angle of 330º, so it's possible to install the nano plastic LED tube in any luminaire.

Installation

When installing the nano plastic LED tube it's sufficient to replace the starter of the ferromagnetic ballast with the LED Starter supplied in the box. In installations with electronic ballasts, you will have to override them and directly connect the 230V power supply to the batten socket on the same side (it's powered from one side only).

To guarantee the service life of the LED tube, we always recommend connecting the 230V power supply directly to the batten, always on the same side, and then connect the tube, making sure to place it in the same direction in which the connections were made.

Advantages

With a luminous efficacy of 140 lumens/W, it's one of the most efficient LED tubes currently on the market. It incorporates a high quality driver designed to not emit flicker and has EMC filter, which avoids interference with other devices such as radios / wifi / music.

Please note that some technical characteristics such as power or CRI may vary depending on the colour temperature of light. For further details, please refer to the attached "Test Reports" in the "Downloads" section or contact our sales advisors.