.jpg){kind=icon}
.jpg){kind=icon}
LED Tube T8 90cm 14W High Efficiency 140 LM/W
SKU:B4009-3-90-OPBF
€2.99
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
LED tube T8 90cm 14W OPAL glass
Replaces conventional 90cm fluorescent light bulbs.
The T8 LED tube, equipped with high brightness SMD 2835 chip and high light transmittance (over 90%) glass and plastic coating, enables uniform light distribution.
- Wide AC input range from 175V to 265V
- High power factor up to 0.5
- Wide opening angle (330º)
- Glare-free opal coating
- Short-circuit and overheat protection
- Including starter jumper
Equivalences of LED tube T8 90 cm:
- LED tube T8 90cm 14W Warm white 3000K is equivalent to T8 90cm fluorescent 30W/830
- LED Tube T8 90cm 14W Neutral White 4000K is equivalent to T8 90cm fluorescent 30W/840 - 30W/845
- LED Tube T8 90cm 14W Cool White 6500K equals T8 90cm fluorescent 30W/860 - 30W/865
Download the step by step installation guide from this link.
Installation of T8 LED tube in ferromagnetic ballasts:
Step 1: Turn off the light at the main switchboard and check that no electric current is coming.
Step 2: Take out the old tube and then the starter.
Step 3: Put the new LED starter bridge (included with each tube).
Step 4: Remove the capacitor or capacitor (to avoid overvoltage).
Step 5: Install the new LED tube.
Installation of T8 LED tube in electronic ballasts:
Step 1: Turn off the light at the main electrical panel and check that no electric current is coming.
Step 2: Remove the old tube (in this case there is no starter, as it is incorporated inside the electronic ballast).
Step 3: Disconnect the cables that enter the electronic ballast (no need to remove it, just disconnect it electrically).
Step 4: Choose one of the 2 tube holders to connect its 2 wires directly to the mains.
Step 5: We recommend to mark the lamp holder where the connection has been made to facilitate the installation of the LED tube.
- If the installation contains a capacitor bank, please consult your specialized technician.
T8 LED tube applications:
- General lighting, direct replacement of conventional 90cm fluorescent tubes.
- Perfect for illuminating enclosed parking lots, offices, stores, shopping malls, kitchens, etc..
- Thanks to its angle, it is ideal for placement on walls.
2016-10-01
Nominal Voltage (V)
230
Lumens (Lm)
1455
Kelvin (K)
3000
4500
6000
4500
6000
Beam angle (º)
330
Socket
G13
Lifetime (h)
30000
IP
IP20
Dimensions (mm) Lxlxh
Ø26x900
Frequency (Hz)
50 - 60
Hue
Cool white
Neutral white
Neutral white
Detection angle (º)
No
Detection range (m)
No
Sensor
No
Efficiency (Lm/w)
104
CRI
80-85
UGR
No
LED Type
SMD 2835
Dimmable
No
Equivalence (W)
30
Power factor (cosφ)
0,5
Driver
Internal
Tube type
T8
Orientable
No
Material
Plastic
Diffuser material
Crystal
Use Outdoor
Yes, with waterproof lamps
Temperature range
No
Frequency of use
Intensive
Energy efficiency class
A+
Certificates
CE
ROHS
ROHS
Warranty
3 years
Questions
| P: Question: |
When will you receive led tubes 90cm 14w 6000k? |
|---|
| R: Answer: | We are pending to receive stock. Please contact comercial@barcelonaled.com for availability. |
|---|
| P: Question: | Hi, does it have a warranty if the tube fails in the first two years? |
|---|
| R: Answer: | The legal warranty of the products is 2 years for normal conditions of use of the product. |
|---|
| P: Question: |
Good morning: It is possible to cancel the ferromagnetic ballasts as well as the electronic ones. the same as electronic ballasts. |
|---|
| R: Answer: | The LED tubes are directly connected to the 220vac electrical network. |
|---|
| P: Question: |
I need two cool-white Led T8 lamps with maximum Lumens, and with bilateral connection on both sides! 90cm long |
|---|
| R: Answer: | Hello, our T8 tubes have the option of a 1- or 2-sided connection, as they come with an additional fitting for this purpose. Choose the light temperature that best suits your environment from cool white, neutral white and warm white. T8 90cm https://www.barcelonaled.com/pt/tubos-armaduras-e-luminarias-led/tubos-led-t8/tubo-led-t8-90-cm-14w-vidro-opalino.html |
|---|
| P: Question: | The terminals are rotatable |
|---|
| R: Answer: | No, the terminals of the T8 LED tubes are not rotatable as they cover angles greater than 330º and normally it is not necessary to illuminate correctly. In some special tubes for power supply where half of the tube is metallic, they can be rotated to direct the light to the product. |
|---|
| P: Question: | K color d light would be the optimal to place them in a cavina d paint d automobiles |
|---|
| R: Answer: | Neutral white may be the most natural looking. But these tubes are not intended for colorimetry and color rendering, they are for general illumination. The tubes in the spray booth must be protected if there are high temperatures, humidity and liquid products. |
|---|
| P: Question: |
One question, are these tubes suitable for tropical aquariums? Thank you |
|---|
| R: Answer: | These are normal LED tubes for lighting, we do not have specific products for tropical aquariums. |
|---|
| P: Question: | Good afternoon the led tube T 8 warm light has the connection by a side tube 90 centimeters oregunto because the connection on the side is easier thanks |
|---|
| R: Answer: | The T8 LED tubes are connected on one side only, marked with a label or silkscreen as input/ input Line (L) and (N) Neutral. |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
