.jpg){kind=icon}
.jpg){kind=icon}
T8 LED tube - 60cm - 9W - 140lm/W
SKU:B4012BN
€3.49
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
T8 LED Tube T8 - 9W - 60cm
LED tube made of nano plastic and ABS with excellent light transmittance, offers instant and flicker-free start-up and turn-on.
It incorporates high performance San'an LED chips, with a total power of 9W. It can replace old 18W fluorescent tubes, reducing energy costs by half.
Its connection is made directly to 230V, so it doesn't need any electronic or ferromagnetic ballast, thus reducing consumption, heat and noise of such transformers.
It has a wide beam angle of 330º, so it's possible to install the nano plastic LED tube in any luminaire.
Installation
When installing the nano plastic LED tube it's sufficient to replace the starter of the ferromagnetic ballast with the LED Starter supplied in the box. In installations with electronic ballasts, you will have to override them and directly connect the 230V power supply to the batten socket on the same side (it's powered from one side only).
To guarantee the service life of the LED tube, we always recommend connecting the 230V power supply directly to the batten, always on the same side, and then connect the tube, making sure to place it in the same direction in which the connections were made.
Advantages
With a luminous efficacy of 140 lumens/W, it's one of the most efficient LED tubes currently on the market. It incorporates a high quality driver designed to not emit flicker and has EMC filter, which avoids interference with other devices such as radios / wifi / music.
|
Product features:
|
Please note that some technical characteristics such as power or CRI may vary depending on the colour temperature of light. For further details, please refer to the attached "Test Reports" in the "Downloads" section or contact our sales advisors.
Questions
| P: Question: | Hello, can these LED tubes be mounted in Tandem type luminaires replacing two conventional fluorescent tubes? |
|---|
| R: Answer: | The T8 LED tubes are connected directly to the 230vac mains and only by the pins on one side. Components from other lighting systems (ballasts, starters, etc.) must be removed and properly reconnected. |
|---|
| P: Question: | I wanted to know if the tubes include the fuse that replaces the starter? |
|---|
| R: Answer: | If they have the fuse/bridge to be replaced in place of the starter |
|---|
| P: Question: |
Good morning, I would like to know what is the real light output, since in the photo it says 130 lm/w, in the top icons it says 894 lm total (which would be about 100 lm/w) and in the text of the description it mentions both 120 lm/w and 90 lm/w. Also in the spectrum test it gives a result of almost 150lm/w. |
|---|
| R: Answer: | In test measurements in the current tubes gives us about 136lm/w can vary to 130lm/w by increasing the temperature or depending on the color temperature. |
|---|
| P: Question: |
Good morning: I would like to know the hours or life span of these tubes. Also if the dimensions are 600 mm x 26 mm. |
|---|
| R: Answer: | The dimensions are 590mm from socket to socket, from pins to pins 600mm. Glass tube diameter 25.40mm, socket diameter 28.05mm, standard 60cm. |
|---|
| P: Question: | What packaging do they come in? Do they come in separate cardboard tubes or are they all loose in a box? |
|---|
| R: Answer: | Hi, The T8 LED tube comes loose in the box due to its high strength. |
|---|
| P: Question: | hello these tubes can be put in watertight screens ? it is for an outdoor sign but this roofed does not hit the water, has led starter ? is connection on one side, if you put it and it does not go turn it and nothing happens ? |
|---|
| R: Answer: | All our LED tubes can be connected to waterproof displays, you can see all our waterproof displays. The LED tubes include starter. |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
