Silicone clamp for Flexible Swimsuit B1939

Silicone Clip for Flexible Swimsuit

Name: Silicone Clip for Flexible Swimsuit
Brand: Barcelona LED
SKU: B1939-G
Price: 0.99 EUR
Availability: InStock

SKU:B1939-G

€0.99 Tax included

In stock 1758 units

Data sheet

Silicone fixing clamp for flexible swimsuits models B1939-2770 and B193-RGB, ideal for securely fixing the flexible swimsuit to any type of surface. It is easy to fix thanks to its flexible design made of silicone.

It has holes for screws, which allows to keep the flexible swimsuit in place regardless of the passage of time or the type of placement. We recommend its use when a lighting installation is going to be made that requires making shapes with LED strips or washers, such as angles or installations in which the LED strip or the washer must be held on a wall to achieve a certain lighting effect, the clips are resistant and will do a great job giving firmness to the LED installation.

Shipping to Africa available

public

For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com

Fastening clips with screws for flexible swimsuits or LED strips are used for fastening in cases where it is not appropriate or strong enough to use 3M double-sided adhesive tape alone, especially for models that are water-resistant.

Another important reason for using staples is to reinforce the adhesive on the swimsuits or strips, since in some cases they are exposed to high temperatures and the surface is not suitable for adhesion of the adhesive tape. This is especially important when installed outdoors, where the temperature becomes very high.

The fastening clips are placed 1 every 200 mm to ensure correct fastening of the bathing suit and to prevent it from slipping from the place where it is to be fastened or sagging. This tool is important for professional finishes and to facilitate the assembly of the LED strips. No need to use soldering.

The fixing clips are made of translucent silicone, it is resistant and flexible, with an ultra-thin design. These clips are ideal for showing off the led strips or swimsuits since being translucent they do not obstruct the beauty of the LED strips or Swimmers.

Installation methods:

The RGB flexible swimsuit comes with 3M double-sided tape. Therefore, if the surface on which it will be installed is smooth, has no irregularities and there is a good heat dissipation can be installed directly flexible swimsuit with 3M tape. If the surface does not allow it or if a different type of product performance is desired, the flexible coverall can be installed using the following accessories:

1. Installation with silicone clips. Fix the flexible cover in the desired position. Screw the silicone clips, immobilizing the swimsuit.
Installation with an aluminum profile. Fasten metal clips to the surface on which you want to install the swimsuit. Clean the surface of the aluminum profile and attach the bathing suit to it using 3M tape. Fix the aluminum profile to the metal clips.
3. Installation with tilting aluminum profile. Fix tilting clips to the surface on which the bathing suit is to be installed. Clean the surface of the aluminum profile and adhere the bathing suit to it with 3M tape. Fix the aluminum profile to the clips that will allow the profile to tilt and therefore direct the light beam.