.jpg){kind=icon}
.jpg){kind=icon}
LED Anti-Flicker Device
SKU:B1010
€3.95
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
LED anti-flicker device for switches
Maximum solution for bulbs less than 15W (usually LED)
Material: white plastic
Dimensions: 32mm x 17mm x 12mm
Input voltage: AC220V
Protection: IP20
The LED anti-flicker device effectively eliminates the small excess voltage loads in the electrical installation that cause LED luminaires (as they need little energy for their operation) to light up or flicker when the electrical circuit is off. It solves 99% of the problems generated by unspent surplus voltage residue. The device offers great resistance and stability in the installation.
ROHS and CE quality certifications.
SOLUTION FOR CONFLICTING INSTALLATIONS THAT GENERATE FLICKERING:
2018-09-06
Certificates
CE
ROHS
ROHS
Questions
| P: Question: | In the case of having several LEDs connected to the same switch, is it necessary to install a device for each LED? |
|---|
| R: Answer: | One on the line where the (flashing bulb) should be sufficient. |
|---|
| P: Question: | Good afternoon, I have problems in a work, that are melting very often the dowling of led 11w that we placed, I checked that the current of the staircase is three-phase 220v. and that the cables that arrive give me polarity in the two cables, that solution I can give, would work the flashing device.gracias de antemano |
|---|
| R: Answer: | The anti-flicker device is not intended for that use. |
|---|
| P: Question: | Hello, I wanted to know the connection diagram in case of having 2 switches and 3 switches in the room. I have put led lighting throughout the house and I have encountered this problem. Thanks |
|---|
| R: Answer: | This device is connected to the line of the luminaire that has lights or flickers. It is connected in parallel to the luminaire, Line red wire and Neutral blue wire as shown in the diagram on the web. |
|---|
| P: Question: | FOR THE DOWLIGTH LED 18W THERE IS SOMETHING LIKE THIS, THIS ANTI-FLICKER B1010 I HAVE PUT IT BUT IT DOES NOT JUST REMOVE IT, IT DECREASES IT BUT IT IS STILL ON, IS THERE SOMETHING THAT CANCELS THE RESIDUAL CURRENT COMPLETELY AND WHEN YOU TURN OFF THE SINGLE-POLE SWITCH THE BULB B1072-BN IS COMPLETELY TURNED OFF. |
|---|
| R: Answer: | If there is still current you should check the installation, there may be a wire still making contact.
Barcelona LED: Marc| 10/05/2020 |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
