.jpg){kind=icon}
.jpg){kind=icon}
-17%
Surface Presence Sensor with 360° IP65 Controller
SKU:SP02B
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
Infrared Motion Sensor 360º with Remote Control
The motion sensor SP02B is a light switch with infrared motion sensor. It incorporates a remote control that allows you to regulate a multitude of functions. You can adjust the ambient light of the work. You can adjust the time it is operational during the day and at night, up to a maximum of 24 hours. You can set the sleep time, the time delay is adjustable, the minimum time is 10 seconds and the maximum time is 30 minutes. In addition, you can also adjust the lux intensity and the detection range by percentage, 25%, 50%, 50%, 75% and 100%, 100% being 25 meters.
The IR sensor is a highly sensitive infrared motion detector with a wide detection angle of 360 degrees.
* Command settings [DIM, D1, D2, D3] not used on the sensor.
How does the IR sensor work?
The IR sensor is a proximity sensor. When it detects presence, it will activate or deactivate the circuit, and vice versa. That is to say, it maintains the function until it detects the new signal. This sensor has a wide detection range of 360 degrees, which allows it to be maintained when people are within the effective distance.
Presence Switch Sensor Applications
The Presence Switch Sensor is a perfect device to place in areas where automatic switching is required, e.g. offices, walk-through areas, under furniture in kitchens, in mirrors, in recessed LED strip installations, etc.
Features of the short distance sensor:
- Voltage: 220-240V/AC.
- Maximum power: 1000W.
- Surface mounted
- Detection distance: adjustable, maximum 25 meters.
- Dimensions: 60x102x102mm
- IP65
- Color: white
- Weight 210 grams
Presence sensor connection diagram
Questions
| P: Question: |
Does the sensor serve Edison pump or LED? Moltes Gracies! |
|---|
| R: Answer: | It can be used for both filament and LED bulbs, as long as the maximum load of the sensor is not exceeded. |
|---|
| P: Question: | Hello, is it possible to adjust the light intensity with the remote control or only the sensitivity to natural light? Thank you and best regards. |
|---|
| R: Answer: | It does not regulate light intensities in the connected luminaire. The sensor can be adjusted in sensitivity, time and ambient light deletion. |
|---|
| P: Question: | Can it be installed on a vertical wall? |
|---|
| R: Answer: | It can be installed on a vertical wall but its recommended use is on ceilings >2.5mts. |
|---|
| P: Question: |
Hello with reference to the product SP02B. It is possible from the control to put permanent option, so that the lights are on all the time. And the other question is whether it has to be installed on the ceiling or can also be installed on the wall. Thank you very much. |
|---|
| R: Answer: | If it can be turned on or off permanently. It can be installed on the wall but its normal use is in ceiling installations at >2,5mts. |
|---|
| P: Question: | If the remote control is lost or broken, can it be configured from the sensor? |
|---|
| R: Answer: | The configuration is only available from the |
|---|
| P: Question: | Hello can you include 2 remote controls instead of one thank you |
|---|
| R: Answer: | Individual controls are not sold for this model, each sensor has one control. |
|---|
| P: Question: |
Hello Hello Referring to the article ( Reference:SP02B ) , I have to slow down the lighting start-up with this regulator I can control the lighting start-up time. Example: From the moment the detector detects the detector the lights are switched on after 10 seconds. Thank you, Greetings |
|---|
| R: Answer: | No, in the sensor you can only set the time the luminaire is on after the last detection of the sensor. |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
