CCT RF dimmer control for LED lighting SUNRICHER - Perfect RF
Total control over the color temperature of dual strips or two strips connected in parallel.
Premium dimmer of the prestigious brand Sunricher with which you can control LED strips with a range of 12V to 36V. If you have a dual strip, which alternates warm white chips with others in cool white, you can vary the intensity of the colors, adjust the brightness or turn it on / off quickly, smoothly and easily.
The problem with dual strips is that if you dim them to a neutral white color temperature, all the chips will be working at full power, so you will get a lot of light. But if you set it to a colder or warmer color, you will lose light, as only half of the chips work (reaching the extremes of the colors).
To avoid this problem, we recommend its use with two LED strips, one of warm color and one of cold color mounted in parallel. In this way we get a better performance and a higher quality and intensity of illumination. This could be done without mounting them in parallel but we should have 2 controls. Using the system that we expose you would only need this controller, achieving maximum light output in both strips regardless of the color temperature chosen.
Features to highlight:
- 256 dimming levels without damaging the view.
- 1 control zone.
- Dimming with a range of 0.1-100%.
- Use a repeater to extend the output power.
- RF (radio frequency) range up to 20 meters.
- Touch panel, soft and comfortable.
- Includes batteries and bracket to place the controller on the wall.
Applications:
- Ideal for use in music venues, bars, restaurants, hospitality, window dressing, stores and commercial premises in general.
- For home use. Any corner is ideal for placing LED strips, as long as the controller is used indoors. It creates different atmospheres according to the hours or moments.
ROHS
Questions
P: Question: |
Hello, I want to use this controller to control the Dual B1514-D LED strip. And I have some doubts: - In addition to the temperature can the intensity be controlled? - Does the remote need to be connected to a transmitter/regulator or is it included with the remote? Thanks in advance, |
---|
R: Answer: | The D2828-CCT temperature controller knob is compatible with controller model D1009-FA, which is for RGBW strips and dual B1514-D strips. With this controller, both the color temperature and the intensity of the strip can be controlled. Switching between color temperature and light intensity is done by continuously pressing the circumference mark on the bottom of the controller. |
---|