.jpg){kind=icon}
.jpg){kind=icon}
RF push button mechanism Single-color dimmer switch for LED lighting 2 keys - SUNRICHER - Easy RF
SKU:D2801K2
€54.45
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
Two-key push-button mechanism, single-color dimmer, radio frequency signal.
It has a smooth, natural and precise dimming of the LEDs ranging from 0.1% to 100% brightness without any flickering.
It is capable of controlling one or two zones with as many receivers as desired. The remote control is usable up to 20 meters. The push-button control is easy to install or uninstall with an adhesive strip included with the dimmer.
- Uses a repeater to extend the output power unlimitedly.
- Push-button power on and dimming
- The remote control battery has a long battery life (approximately 5 years).
- No flashing or flickering, so it is very comfortable for the human eye.
- 0.1-100% dimming range
- Single button to turn on, turn off and dim each of the two zones.
- Each receiver can be controlled by up to 8 remotes.
- Remote control up to 20 meters
- High reliability and stability
Nominal Voltage (V)
3V-DC
Lifetime (h)
35000
IP
IP20
Dimensions (mm) Lxlxh
86x86x13
Detection range (m)
25000
Sensor
Yes
Colour control
Monocolor
Connectivity
Radiofrequency
Material
Plastic
Use Outdoor
No
Temperature range
0 ~ +40°C
Frequency of use
Intensive
Energy efficiency class
A+ (2021)
Certificates
CE
ROHS
ROHS
Warranty
5 years
Number of zones
1
Questions
| P: Question: |
Double dimmer switch for single-color radio frequency lights. Good morning, how do you select the voltage on this switch? |
|---|
| R: Answer: | It is not a conventional switch, it has no wiring or contact mechanisms, it is battery-operated and is for two zones. This RF switch is connected by radio frequency to the controllers specific to this product in order to turn it on/off or regulate the intensity. The controllers can be synchronized with several switches for use in activating and deactivating several locations. It is these controllers that connect between the 220v mains and the lamp, driver or LED strip, depending on the model. They can be chosen from the accessories section of the product. ref. D2501AC, D2501N, D2501NS |
|---|
| P: Question: | Hi, I wanted to know if it is switchable and if it works with dimmable bulbs or if they have to be smart. |
|---|
| R: Answer: | It is not a conventional switch, there is no wiring connection, no contact mechanism, it is battery operated and is for two zones. This RF switch connects by radio frequency with the specific controllers of this product to be able to turn on/off or dim. The controllers can be synchronized with various switches for use in switching (on and off from various locations). It is these controllers that are connected between the 220v mains and the bulb, driver or led strip depending on the model. They can be chosen in the accessories section of the product, ref. D2501AC, D2501N, D2501NS, etc. |
|---|
| P: Question: |
Good morning, Yesterday I placed an order (VXMZBVHIA) which included a 6W recessed circular LED downlight and a dimmable / dimmable driver for 7W recessed bulb because I want to make an assembly of 4 dimmable LED lights from a single dimmer. My question is that if the D2801K2 switch would work for this purpose. Thank you and best regards |
|---|
| R: Answer: | Yes, the two-key push button can be used to dim the downlights, but that button is used in conjunction with the D2501AC controller, which are synchronized together by radio frequency to achieve dimming. If the intention is to dim two different zones with the double push button, you will need two D2501AC controllers, one for each zone. |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
