.jpg){kind=icon}
.jpg){kind=icon}
Kit 6 recessed LED staircase beacons 0,4W 12V-DC IP67
SKU:BA50005-AZ
€69.95
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
KIT 6 LED spotlights for stairs 0,4W Ø35x24mm IP67 (Complete kit ready to use).
The kit consists of 6 LED floor lights, an 8W transformer and extension and connection cable. The whole set is IP67 rated for outdoor use.
Description of step light kit
The LED step light uses 1 SMD 5050 LED as the light source, encapsulated in a zinc alloy housing, and the light surface is sealed with transparent silicone, so the light emitted is uniform and homogenous. Our LED stair lights have a modern design and elegant appearance, and are highly impact resistant, designed for long service life and low power consumption. They can be used both indoors and outdoors, being a completely waterproof product (IP67) and resistant to any weather conditions.
The KIT of LED spotlights for stairs consists of a power supply of 8 Watts, 6 points of light and all the necessary wiring for installation. The cable length between 2 points of light is 1 meter. Its possible uses are almost infinite: from signage lighting in gardens, as an elegant decorative light on floors or stairs, in corridors, terraces, around your pool, etc... Let your imagination run wild and give an original and distinctive touch to any project or renovation you have in hand!
* Technical data:
º Consumption: less than 3 Watts each KIT of 6 lights (0.4W each light).
º Type of chip: 0.24W SMD5050
º Number of LEDs per light: 1 LED per light point
Quantity of lights per KIT: 6 light points per KIT
Input Voltage: AC 220 Volt
º Working voltage of the lights: DC 12V
º Working Temperature: -10°C ~ +65°C
º Insulation degree: IP67 (suitable for outdoor use)
º Estimated life time: > 50,000 hours
º Dimensions: 35mm diameter x 31mm deep
º Cutting diameter: 24mm
COMPLETE KIT (Ready to use).
Main characteristics
º Ideal product for outdoor and indoor use.
º Very low power consumption, only 3 Watts, ideal for all energy saving applications.
º Mainly as a signaling light or decorative light.
º Available in silver color.
No UV or IR radiation, 0% mercury or hazardous materials, environmentally friendly.
º No heat generation.
º No noticeable flickering.
Certifications: CE and RoHS.
Two years warranty.
Blue color:
Nominal Voltage (V)
12V-DC
Power (W)
6x 0,4
Kelvin (K)
3000
6000
6000
Lifetime (h)
25000
IP
IP67
Frequency (Hz)
50 - 60
Hue
Blue
Cool white
Warm white
Cool white
Warm white
LED Type
SMD 5050
Dimmable
Yes
Driver
External, including
Cutting dimensions (mm)
Ø24
Material
Stainless steel
Diffuser material
Polycarbonate
Use Outdoor
Yes
Temperature range
-20°C ~ +40°C
Frequency of use
Normal
Energy efficiency class
A+ (2021)
Certificates
CE
ROHS
ROHS
Warranty
According to legal guarantee: 2 years
Questions
| P: Question: |
Is it possible to choose a stainless steel or white finish? Thank you |
|---|
| R: Answer: | Currently only this finish model is available. |
|---|
| P: Question: | Hello, can you cut the wires to be able to embed it to the wall of a step and not have q connect the connectors? And another thing, are they in parallel or in series, I say that if I cut the wires to know how to connect them, thanks |
|---|
| R: Answer: | Cutting can be done, but the connector is to make a quick and watertight connection. They are connected in parallel and have polarity (warranty does not cover tampering). |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
