Kit of 6 ladder lights 0,3W 12V-DC Ø24X38.5mm
Kit of 6 recessed stair lights Ø24X38.5mm IP67
6 LED stair lights, one 8W transformer and IP67 cable. The LED stair or down light uses high quality SMD 3350 LED chip as light source, encapsulated in zinc alloy housing and the luminous surface is sealed with transparent silicone, so the light emitted is uniform and homogeneous, with a luminous intensity of 12 lumens each. The beam opening angle is 120 degrees.
Our LED stair lights have a modern design and elegant appearance, with compact dimensions and weighing only 62g. They are also highly impact resistant, designed for long luminaire life and very low power consumption.
Ideal for both indoors and outdoors, being a completely waterproof product, with IP67 degree of protection, and resistant to any weather conditions.
Constant voltage of 12V DC, with a power of 0.3W per light, in warm white of 3000ºK and with a color rendering CRI 80. These ladder lights support up to 100Kg and have an IP67 male connector that can be connected directly to the controller or to a connecting cable.
LED The LED stair light KIT consists of an 8W power supply, 6 light points, and all necessary wiring for installation. The cable length between 2 light points is 1 meter. With multiple uses: elegant decorative light on floors or stairs, in corridors, garden signage, on terraces, skirting boards, around your swimming pool, etc...
Technical data sheet of the recessed light kit:
º Consumption: less than 3 Watts each KIT of 6 lights (0.3W each light).
º Number of lights per KIT: 6 lights per KIT.
º Input voltage of the power supply: AC 220 Volts.
º Working voltage of the lights: DC 12V.
CRI 80.
Opening angle of the light beam: 120 degrees.
Working Temperature: -10°C ~ +65°C.
Insulation rating: IP67 (suitable for outdoor use).
Estimated life time: > 50,000 hours.
º Dimensions: Ø24mm diameter x 38.5mm depth.
º Cutting diameter: Ø18mm
LED light kit applications
º Floor lighting, for indoor and outdoor use.
º Stairs.
º Pathway lighting in bars and restaurants.
º Plinth lighting.
º Deck lighting.
º Ideal for rooms such as kitchens and bathrooms.
Main features of the kit of beacons for stairs:
º Ideal product for outdoor and indoor use.
º Very low power consumption, only 3.6 Watt, ideal for all energy saving applications.
º Mainly as a signaling light or decorative light.
º Silver color design, with anti-glare bezel
No UV and IR radiation, 0% mercury or hazardous materials, environmentally friendly.
º No heat generation.
º No noticeable flickering at all.
Certifications: CE and RoHS.
Two years warranty.
ROHS
Questions
P: Question: | Do you have them in warm light ? they can be individually dimmed to 12 V. |
---|
R: Answer: | This model BA50007-BC is the 3000ºK warm light, to regulate individually you will need independent circuits with a dimmer per light type ref. D1009CS + the 12Vdc power supply. |
---|
P: Question: |
Hello, I would like to know if this light can be used to place it in a hole that has been made in the wall of the shower itself and that will be used as a soap dish. It would be placed in the upper part of the hole. That is, I would like to know if it can be placed in such a way that the beam of light shines downwards instead of upwards and also if it is sufficient protection with an IP67 in case it gets a jet of water from the shower. Thank you very much |
---|
R: Answer: | The beacons are intended for signaling outdoor areas. Due to its IP rating and low voltage, it should not be a problem for zone 0 in wet rooms. Consult professional installers for installation according to regulations. |
---|