.jpg){kind=icon}
.jpg){kind=icon}
LED ground recessed beacon spotlight 0.5W 12V-DC IP67
SKU:BA50010-AZ
€14.99
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
LED ground recessed beacon light IP67 12V-DC 0,5W
LED light for signaling or floor decoration. Available in warm white, cold white or blue color.
Beacon warm white 3000K:
Beacon cold white 6000K:
Blue color beacon:
LED circularrecessed downlight, with a high degree of IP67 waterproofing, suitable for indoor or outdoor lighting.
The LED recessed downlight is made of stainless steel housing and opal polycarbonate diffuser.
Outer diameter of the box: Ø60mm
Depth: 29,5mm
Beacon dimensions: Ø53mm
Requires 12V-DC power supply (not included).
The lower base is removable and hides the cable connection through the base, so the beacon can be installed in shallow floors, with a depth of only 1cm.
It is delivered with metallic box that allows the beacon to be installed on concrete , wooden platform etc... etc....
Applications:
- Outdoor lighting: terrace, garden, stairs, patio.
- Indoor lighting: floor, wall.
- Illumination of roads and paths.
Nominal Voltage (V)
12V-DC
Power (W)
0,5
Lumens (Lm)
7
Kelvin (K)
3000
6000
6000
Beam angle (º)
120
Lifetime (h)
25000
IP
IP67
Dimensions (mm) Lxlxh
Ø60x29,5
Frequency (Hz)
50 - 60
Hue
Blue
Cool white
Warm white
Cool white
Warm white
LED Type
SMD 2835
Dimmable
Yes
Driver
Not included
Material
Stainless steel
Diffuser material
Polycarbonate
Use Outdoor
Yes
Temperature range
-20°C ~ +40°C
Frequency of use
Normal
Energy efficiency class
A+ (2021)
Certificates
CE
ROHS
ROHS
Warranty
According to legal guarantee: 2 years
Questions
| P: Question: |
Good morning. Is this same type of beacon manufactured in 24vdc? Thank you. |
|---|
| R: Answer: | It is only available in 12Vdc |
|---|
| P: Question: | Good afternoon, I would need 26 Led spotlights but I would like to know previously the anchoring system they have to the ground, without only fits to the ground, takes some fixing tabs etc thanks. |
|---|
| R: Answer: | It fits into the ground by pressure, it has some small indentations but the hole must be cut just in the focus so that it is not loose. |
|---|
| P: Question: |
Does it support the passage of vehicles over it? |
|---|
| R: Answer: | Not recommended for this use, you may be interested in ref. 1F1.000.000.AXU1L. |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
