.jpg){kind=icon}
.jpg){kind=icon}
LED strip controller CCT - 12/24V DC - 2.4G - MiBoxer - FUT035
SKU:B1410CCT
€14.99
Tax included
Shipping to Africa available
For any shipping requests to Africa, please contact our sales department at: comercial@barcelonaled.com
The single/dual color controller allows remote control of LED strips using a MiBoxer RF remote. The 2.4Ghz communication provides fast response, without interference. The maximum distance between the remote and the nearest controller is 30 meters.
In addition, LED strips can also be controlled by smartphones or voice control devices (Alexa, Google Assistant), using a Mi Boxer 2.4GHz Gateway system.
Installation of the controller is very simple, it is powered at 12-24 V DC via a Jack connector or can be connected via cable directly into the V+/V- ports. A maximum output current of 10A is obtained.
If LED strips are installed in different zones or rooms, one controller per zone must be installed, but one controller can control up to 4 zones.
Precautions
- Verify that the input voltage power supply is compatible with the controller.
- Try not to use the controller in a place of large metal area or strong electromagnetic wave nearby, otherwise the remote control distance will be affected.
|
Main product features:
|
Nominal Voltage (V)
12-24V
Lifetime (h)
35000
IP
IP20
Dimensions (mm) Lxlxh
85x45x22,5
Colour control
CCT
Monocolor
Monocolor
Connectivity
RF
Material
Plastic
Use Outdoor
No
Frequency of use
Intensive
Energy efficiency class
A+ (2021)
Certificates
CE
ROHS
ROHS
Warranty
According to legal guarantee: 2 years
Maximum intensity (A)
10
Control Distance
30m
Questions
| P: Question: | What is the maximum power they can support? |
|---|
| R: Answer: | Hello, this controller has a maximum input and output power of 24 V DC. Thank you very much!
Barcelona LED: Alejandro| 09/09/2024 |
|---|
| P: Question: | We have the receiver but I cannot link it with receiver amplifier for a distance of 15m. |
|---|
| R: Answer: | This controller for CCT strips is linked with its corresponding controller Ref. B1400CCT. To link to the router wifi network and use by mobile App you need B1400-2-WIFI. It should reach 15m if there are no obstacles or the receiver is hidden. |
|---|
| P: Question: |
Good, I am looking for CCT led strip for this device of 120 led / meter minimum. and also the power supply for 10metros. as well as connectors, or any element that I would need. Can you pass me a list of these products to order? Thanks |
|---|
| R: Answer: | Our CCT strip model is ref. B1514-D. For quotations and sales you can contact comercial@barcelonaled.com |
|---|
| P: Question: |
Can the LED strips be switched off/on and dimmed 0/24V. The LED strips in both channels via WiFi from the cell phone. Apart from the phone, does not carry some kind of conventional dimming DALI type? What is the delivery time for orders? |
|---|
| R: Answer: | The WIFI receiver for CCT strips is used to regulate the color temperature. The WIFI receiver for CCT strips can not be dimmed with DALI. You can check the delivery conditions of theWIFI receiverfor CCT strips and all our products in the shipping and delivery costs section. |
|---|
Page: 1
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
