Outdoor solar LED strip with remote control - RGB / 2700K - 40W - 10 meters - IP65

Outdoor solar LED strip with controller 40W - 10 meters - RGB/ 2700K

• High efficiency: SMD2835 LED chips offering high efficiency and uniform light over the entire length of the strip.
  
  
• Shades: Available in RGB and warm white (2700K).
  
  
• Dimensions and cut: RGB: width 14mm, length 10m and cut every 165mm. Single color: width 12mm, length 10m and cut every 100mm. It should be taken into account that when cutting the strip it can lose its watertightness.
  
  
• Solar panel:5W / 5V solar panelwith 4Ah / 3.2V battery. Autonomy: up to 12 hours with 4-6 hours of solar charging.
  
  
• Panel installation: It has a support to fix on concrete surfaces such as walls or ceilings with screws, or can be anchored in soil, sand or grass with a stake provided for this purpose.
  
  
• Control mode from the panel: It incorporates a button on the back, this must be pressed for two seconds to either turn on or turn off the strip. It also has a light indicator, when the light is green it is on, when the light is red it is charging. RGB mode: by pressing the button you can adjust the system for "breathing", "full color", or single color modes.
  
  
• Remote control: Allows full control of the LED strip, allowing functions such as on, off, timing, brightness adjustment (only in single color) and selection of dynamic modes.

• Resistance: IP65 protection, ideal for outdoor use.

Recommended use for solar LED strips

• Decorative lighting in gardens, patios, paths and facades.
• Signaling in danger zones.
• Festive atmospheres in outdoor events.
• Enhancement of decorative elements such as fountains or sculptures.